Water Distribution

Intelligent Spray System

Overwatering of haul roads by water trucks is a major contributor to uncontrolled movements by vehicles utilising these roads. This road hazard causes incidents of skidding/sliding and vehicle roll-over as well as increased road maintenance costs. The SVA patented Intelligent Spray System (ISS) is specifically designed to minimize excessive watering using speed dependant and gradient adjustment technology.

 

SVA’s “Intelligent Spray System” (ISS) utilises SVA designed spray heads which control water output relative to vehicle road speed. Traditional spray patterns have no control over the water film thickness, the spray width is dependent on the truck engine RPM and that results in an inconsistent spray width. Utilising SVA’s Intelligent Spray System results in applying a constant film of water on the road surface regardless of the truck speed. As such the spray width stays constant therefore preventing over-watering.

 
 
ISS applies a constant film of water on the road surface regardless of the truck speed. The spray width stays constant at 12 metres.

ISS applies a constant film of water on the road surface regardless of the truck speed. The spray width stays constant at 12 metres.

Traditional spray systems have no control over the water film thickness, the spray width is dependant on the truck engine revs and this results in an inconsistant spray width.

Traditional spray systems have no control over the water film thickness, the spray width is dependant on the truck engine revs and this results in an inconsistant spray width.

When driving up a ramp the ISS adjusts to maintain a constant film of water and a constant 12 metre wide spray pattern

When driving up a ramp the ISS adjusts to maintain a constant film of water and a constant 12 metre wide spray pattern

With a traditional spray system the spray will overwater the road once the truck is travelling up the ramp. This causes hazardous driving conditions resulting from rutting and erosion.

With a traditional spray system the spray will overwater the road once the truck is travelling up the ramp. This causes hazardous driving conditions resulting from rutting and erosion.

The SVA pump frame is designed to accomodate SVA’s standard spray system or the Intelligent Spray System option.

The pump frame supporting the water pump and all spray bar pipe work is a bolt-on, removable frame mounted to the rear section of the tank subframe with built in fork lift pockets for ease of handling.

The frame has locating hooks to allow installation and final bolting without needing to work under a suspended load.

The water pump & hydraulic motor arrangement is mounted on a removable skid bolted to the pump frame assembly to be easily and safely removed for component change-out at ground level.


spray system.jpg

The Intelligent Spray System can be supplied with a variety of spray widths to suit specific customer requirements and applications.

 
spray dimensions 1.png
spray dimensions 2.png
 

All above measurements are in mm